PLEASE NOTE That the store will be closed 21/3/24 to 4/4/24 orders can be palced but will not be dispatched until 5/4/24

Suspension Project kit SAVING £91.95
Suspension Project kit SAVING £91.95
Suspension Project kit SAVING £91.95
Suspension Project kit SAVING £91.95
Suspension Project kit SAVING £91.95
  • Load image into Gallery viewer, Suspension Project kit SAVING £91.95
  • Load image into Gallery viewer, Suspension Project kit SAVING £91.95
  • Load image into Gallery viewer, Suspension Project kit SAVING £91.95
  • Load image into Gallery viewer, Suspension Project kit SAVING £91.95
  • Load image into Gallery viewer, Suspension Project kit SAVING £91.95

Suspension Project kit SAVING £91.95

Regular price
£995.00
Sale price
£995.00
Regular price
Sold out
Unit price
per 

Suspension Project kit. SAVING £91.95 over individual prices

This is a project kit to full upgrade your suspension.

The kit includes:

  • Monarch Front and Rear progressive rate springs ( available at Std, 1" or 2" lowered heights)
  • GAZ GT series Front and Rear adjustable Shocks (Monarch Special design for 1" & 2" lowered)
  • Superpro front and rear Polyurethane bush set 
  • Monarch Adjustable Rear Trailing Arm Brackets

Monarch progressive springs 

Our progressive rate springs provide standard rate for first 1" of wheel travel, then stiffen with compression giving anti-roll properties.

They are available as standard height or lowered as required, please select height required by using our guide.

n.b. Standard Height is 14 1/2" measured from the centre axis of the wheel to the underside of the top of the wheel arch (ie. at 12 o' clock). This is for both front and back wheels.

We recommend that the front is 1/2" lower than the back as a slight forward rake looks right for the Stag. Level is OK, but the back must not be lower than the front.

Kit includes 2 x front and 2 x rear please contact me with specific height, Std, -1", -1.5" or -2" 

GAZ GT series

These complement the Monarch Progressive rate springs, available at standard or special lowered 1" or 2". 

Specially designed to compliment the Monarch 1" or  2" lowered progressive springs. To stop the shocks bottoming out and offering room for compression.

These will adjust bump and rebound off a single control knob.

Superpro front and rear Polyurethane bush set

Complete kit to enable you to replace the front and rear bushes. A significant improvement from the original soft rubber bushes. This set comes with stainless steel inner sleeves and is a straight push in replacement for the existing bushes. The traditional ‘wayward back end’ feeling is much reduced by using this polymer bush set.

  • Suitable for Triumph Stag (mk1 & mk2)
  • Uprated poly bushes
  • Improved road holding

Monarch Adjustable Trailing Arm /bracket

To reset rear camber angle when lowering car. Infinite adjustment.

When lowering your suspension the rear wheel camber will change and has to be reset to bring it back within specification. These modified Stag brackets are brand new and will give you infinite adjustment for lowering the car by any amount. Adjust the camber on-car with one hand. Fit in place of existing inner brackets.

Kit contains a pair

Australia/USA/Canada - Unfortunately due to insurance limitations we are unable to ship this kit to these countries.